VME and CompactPCI Products

We offers a broad range of 3U and 6U VMEbus, CompactPCI and Advanced TCA modules which are especially well suited to industrial and/or rugged real-time applications. Processors supported include the Intel Pentium III, Xeon, Pentium M, Core-Duo, and Freescale's PowerQuicc II and PowerQuicc III. Customized versions of existing single-board computer designs available on fast turn-around in a variety of form factors. PMC and Industry Pack mezzanine standards are fully supported for I/O expansion. Software driver support is offered for VxWorks®, and Linux™. X86 products additionally support Windows XP®, QNX®, LynxOS®, LynuxWorks™, and Solaris™

Intel x86/Pentium Processor Boards
Model Number Processor 
Type 		 Description Size
DPM
Pentium® M
 Single-slot VME CPU board with 1.4 GHz Pentium M
Available in either the Ultra Low Voltage 1.0 GHz @ 5W version, Low Voltage at 1.4 GHz @ 10W, or 1.8 GHz at 11 W 400 MT/sec System Bus VITA 31,1 compliant Convection cooled and rugged conduction-cooled versions Support for Windows, VxWorks, Linux, QNX and Solaris -40°/+85° Versions available		 6U
RPM
Pentium® M
 Conduction-cooled VME64 Single-slot CPU board with 1.4 GHz Pentium-M.
Intel® Pentium® M Processor: Single-slot VMEbus operation with an on-board compactFlash disk for bootable mass storage 855GME and 6300ESB Chipset -40°/+85°C operation with 1.4 GHz Pentium M		 6U
DHC
Low Power Xeon
 Single-slot VME CPU board with 1.6 GHz LV Xeon
LV Xeon™ processor at 1.6, 2.0 or 2.4 GHz The Intel® NetBurst™ microarchitecture with long 20- step instruction pipelines System Bus bandwidth of 3.2GB/s (400MHz) Single-slot VMEbus operation with on-board CompactFlash disk for bootable mass storage and a low-profile heat sink		 6U
DMC
 Pentium III or Celeron Single-slot VME CPU board with dual PMC sites, 1.2 GHz Pentium III or 1.2 GHz Celeron
Provides Maximum VME Single-Slot Functionality Pentium III or Celeron support Standard front panel I/O Tundra Universe IID PCI-VMEbus interface provides 64-bit VMEbus One or two Intel 82559 single chip Ethernet controllers		 6U
DPC2
Pentium III
 Pentium III 6U VME Processor Module
256 MB L2 cache Single-slot VMEbus operation with CompactFlash disk support Supports Intel's EMC-2 Low power module which supports Pentium III with on-die cache SCSI, COM2, PMC I/O are routed out a five-row VME64 P2 connector		 6U
DPD/RPD
Pentium Core-Duo Processor

PentiumCore Duo 6U VME Processor Module
Pentium Core-Duo Processor @ 1.66 GHz E7520 Chipset for PCI support and high memory bandwidth On-board SVGA Controller Two Gb LAN front panel ports plus two more routed to the backplane in compliance with Vita 31.1 Supports two PMC sites, one of which optionally supports XMC modules Available in conduction cooled versions for rugged applications Support for Windows, VxWorks, Linux, QNX and Solaris

6U
Home       Back to Top

Digital I/O Boards
Model Number   Description Size
DII32 32 Channel
Opto Input		 Channels: 32 opto-coupler input channels with debouncers Input Range: 5V to 48V, 10mA to 30mA 6U
DIO32 Relay Output Board Channels: 32 opto-coupler input channels with debouncers Input Range: 5V to 48V, 10mA to 30mA 6U

Serial I/O Boards
DICB8 Serial I/O

CMOS 68000 Based 8-channel Serial I/O Module
Processor: Motorola's 68HC000 @ 12.5 MHz channels with debouncers Eight channels configurable as RS-232 or RS-422/485 (selected in pairs)

6U
SI002 Serial I/O

Serial Input/Output Board
2, 4, 6 or 8 full-duplex channels Controller: 68C681

6U
Home       Back to Top

Video/Graphics/Imaging Boards

Model Number Function Description Size
DFG Frame Grabber High Resolution Frame Grabber
Supports one high res frame (512 x 486) or four low res frames (256 x 243) 256 KB of local RAM 8 bits per pixel High res: 1/30 second Grab Rate 		3U
DCG2
 Graphics Controller Low-Cost 6U Graphics Controller with Overlay
TI's TMS34010 Graphics System Processor 640 x 480, 512 x 512, 640 x 400 VGA Resolutions 512 Kbyte VideoRAM 4 or 8 bit pixel modes 		3U
Home       Back to Top

Networking Boards
Model Number Function Description Size
ET003 Ethernet Controller Low Cost Ethernet Controller
AMD AM-7990, with on-chip DMA little software overhead Intel 82503 with AUI and 10BaseT support 32-bit unique board specific node identification code 7 level, vector programmable VMEbus interrupter 		3U
DLAN
 Low Power Ethernet Controller Low Power, Low Cost Ethernet Controller
Fujitsu's 86950B "EtherStar" Ethernet controller, requires little software overhead 64 KB of vertical SRAM accessible from the VMEbus		 3U
Home       Back to Top

Special Function Boards
Model Number Function Description Size
DGPS GPS Interface Low Power, Low Cost GPS Interface
Supports one high res frame (512 x 486) or four low res frames (256 x 243) 256 KB of local RAM 8 bits per pixel High res: 1/30 second Grab Rate		 3U
Home       Back to Top

Bus Interfaces
Model Number Function Description Size
DGPS Controller 3U PC/104 Card Controller
ISA & IDE interface included for low-power rugged 2" hard drives Analog I/O Graphics Control Release on register access (RORA) 		3U
PM001 Memory Board PCMCIA/FLASH Memory Board
Two independent 16-bit slots Memory and I/O card support Programmable in 50ns steps from 150ns to 300ns VPP generation via two separate DC/DC converters		 3U
IPC01 Passive IP-Carrier Passive IP-Carrier
4 IP Slots with ID, IO and memory select lines 8/16 bit single or double wide IP module support On-board reset generator for power up/down sequences Flexible interrupt structure 		6U
IPCO3 Passive IP Carrier Rugged Passive IP Carrier with Rear I/O for VMEbus
Four on-board IP-slots D8/D16 memory cycle support 8 x 7-level and vector programmable VMEbus interrupter Fuse protection for 5 V supply of each IP-slot		 6U
IP003

Passive IP-Carrier

 Passive IP-Carrier
2 on-board IP Slots 2/1/0.5/0.25/0 MB Programmable Memory Space Very low component mounting height underneath IP module area Works as VMEbus A16/A23, D8/D16 slave board		 3U
Home       Back to Top

CompactPCI Products
Processor Modules
CHC
 CompactPCI/PICMG 2.16 6U LV Xeon™ CPU board
Intel® NetBurst™ microarchitecture with long 20- step instruction pipelines 400 MHz system bus Unique clock-doubled arithmetic logic unit called the Rapid Execution Engine PLX Technology's PCI 6254 dual mode universal asynchronous 64-bit, 66Mhz PCI-to-PCI bridge Transparent or Non-transparent modes for multi-processing
CPC45
 CompactPCI CPU with MPC8245
MPC8245 300MHz Processor 2MB / 32 Bit buffered via GoldCap SRAM One slot for CompactFlash Real-Time Clock via serial I2C, buffered One 4-bit Hex Switch
CPM1
 CompactPCI/PICMG 2.16 Pentium M CPU Board
CPCI and PICMG 2.16 compatible Available with the Ultra Low Voltage 1.0 GHz @ 5.5 W , the Low Voltage at 1.4 GHz @ 10 W or 1.8 GHz @ 21 W Two PMC sites in a single-slot 1 GB DDR-267 Bootable CompactFlash -40°/+85°C operating temperature versions available at 1.4 GHz and 1.8 GHz Also available in rugged, conduction-cooled versions
CRM1
 Conduction-cooled CompactPCI/PICMG 2.16 Pentium M CPU Board
CPCI and PICMG 2.16 compatible Intel® Pentium® M Processor: Single-slot operation with an on-board CompactFlash disk for bootable mass storage 855GME and 6300ESB Chipset Special versions with -40°/+85°C operation with 1.4 GHz Pentium M
C3PM/C3RM
 3U convection-cooled or conduction-cooled Pentium M CPCI
CPCI compatible 3U form factor Available with the Ultra Low Voltage 1.0 GHz @ 5.5 W , the Low Voltage at 1.4 GHz @ 10 W 512 M B DDR-267 Bootable CompactFlash -40°/+85°C operating temperature versions Also available in rugged, conduction-cooled versions

Communication Boards
CSATA
Quad Channel Serial ATA CompactPCI Card
Supports hot-plug SATA drives Direct Port Access (DPA mode or Master/Master) for high performance Compliant with both SATA 1.0 and SATA II: Extensions to 1.0 specifications Two dual-stacked industry standard front panel serial ATA connectors

Industry Pack Module Carriers
CIPC
Intelligent DSP Based Dual Industry Pack Carrier
CPCI 3U module supports two standard Industry Pack modules Supports 8 and 32 MHz Industry Packs DSP can be used to move data to or from PCI bus DMA transfers to and from the CompactPCI bus
CSIP
Dual Industry Pack Carrier
CPCI 3U module supports two standard Industry Pack modules Supports 8 and 32 MHz Industry Packs Wide range of IndustryPack modules supported Front panel I/O, locking connector
CQIPC

Intelligent DSP Based Quad Industry Pack Carrier
CPCI 6U module supports four standard Industry Pack modules Supports 8 and 32 MHz Industry Packs TMS320C31 DSP control engine Front panel I/O with CE approved connectors

CDIPC
Intelligent Based Quad Industry Pack Carrier with Dual DSPs
Supports four standard Industry Pack modules, two for each DSP Supports 8 and 32 MHz Industry Packs Two TMS320C31 DSP control engines Front panel I/O with CE approved connectors
Home       Back to Top

Chassis and Card Cages
MCK371
3U rackmount chassis, CPU slot x 1 plus 7 available slots, 320W power supply, with 3U single system backplane
MCK6700R
6U rackmount chassis for rear I/O use, 7 available slots, 320 W power supply, 1 drive bay included, with 6U cPCI backplane and hot swap support
Home       Back to Top

VME Chassis
We are experienced in VME Chassis design and production, including various backplane configurations and I/O connectors. Allow our engineering staff to assist you with designing, drawing and fabricating your custom VME Chassis.
Home       Back to Top
Contact us at:
Phone: 970-871-0319 Fax: 970-875-0344
FEMA is a member of the Electronics Representatives Association (ERA)era logo

Home Page | Link to ERA | Email Us | Request Information | Company Information | Where to Eat
Copyright & Copy; 2007; FEMA,Inc.
Designed and maintained by E G Consulting & Computer Services