Rugged Greyscale Thermal Printers

   
 

PRINT QUALITY
     

120 Series

  
200 Series
       
  Print width   12" (304.8mm), 2368 pixels   20" (508mm), 4096 pixels
       
  Print resolution   200 dpi   200 dpi
       
  Line spacing   Up to 200 lines/inch   Up to 200 lines/inch
       
  Greyscales   16 to 256   16 to 256
       
  Print speed   Up to 64 lines/second   Up to 64 lines/second
       
 

INPUTS AND INTERFACES
  Analogue  

Three independent analogue channels on BNC connectors with separate trigger input and outputs.
Sensitivity: 10mV to 10V
Polarity +, - or bipolar
input protection 100V
Trigger i/p 0.5V to 10V

   Three independent analogue channels on BNC connectors with separate trigger input and outputs
Sensitivity: 10mV to 10V
Polarity +, - or bipolar
input protection 100V
Trigger i/p 0.5V to 10V
       
  Digital   Centronics (parallel) & serial as standard   Centronics & serial (model 138)
GPIB/IEEE-488 (model 137)
       
  Annotation   Text annotation over analogue data via RS232 interface    
           
 

CONTROLS AND INDICATORS
  Keypad   Full control and setup via comprehensive keypad on front panel. Controls include:
Configure 1, 2 or 3 channel display
Channel settings: sweep time; delay time; data sensitivity; data polarity; contrast; sweep direction; trigger sensitivity; internal/external trigger (all independent for each channel)
Event mark, reset, on-line/off-line, test pattern print, paper advance, status print-out scale lines, paper speed.
Load and save settings (all settings saved to non-volatile memory)
       
  Display   In-built LCD display for status, settings and error messages
       
  Indicators   LEDs for power, stand-by and fault
       
  Remote control   Extensive remote control capability using commands over digital interfaces
       
 

MEDIA
  Thermal paper   315mm (12.4") wide x 100m long
Up to 19dB dynamic range (typical)
   525mm wide (20.67") x 100m long
Up to 19dB dynamic range (typical)
       
  Thermal film   315mm (12.4") wide x 75m long
Up to 23dB dynamic range (typical)
   525mm wide (20.67") x 75m long
Up to 23dB dynamic range (typical)
           
 

ENVIRONMENTAL
  Operating temperature  

0°C to +50°C

   0°C to +50°C
       
  Storage temperature   -20°C to +60°C   -20°C to +60°C
       
  Shock and vibration       MIL STD 810D
       
  EMC   In accordance with CE   MIL STD 461B, part 5, Class A4
       
  MTBF       15,000 hours, Ground Benign
           
 

PHYSICAL
  Dimensions   443mm x 430mm x 180mm
(h x w x d)
17.45" x 17" x 7.1" stood vertical
19" rack mount compatible
   225mm x 660mm x 520mm
(h x w x d)
8.855" x 26" x 20.5" laid flat
       
  Weight   23kg (51lbs)   23kg (51lbs)
       
  Power   90 to 264 Vac, 47 to 63Hz auto-ranging   90 to 264 Vac, 47 to 63Hz auto-ranging
       
 

Repairs
We operate a dedicated repair service. Click here to send e-mail.

Recommendations for cleaning the print head
The use of surgical alcohol wipes with a soft implement such as a small wooden spatula, is the best way to remove residue. Sharp metal tools, such as screwdrivers or knives must not be used as these can easily damage the print head beyond repair.
For advice on print head cleaning or other technical issues, please contact our technical support team. Click here to send e-mail.

Contact us at:
Phone: 970-871-0319 Fax: 970-875-0344
FEMA is a member of the Electronics Representatives Association (ERA)era logo

Home Page | Link to ERA | Email Us | Request Information | Company Information | Where to Eat
Copyright & Copy; 2007; FEMA,Inc.
Designed and maintained by E G Consulting & Computer Services